Category
- New Towing & Recovery Products
- New Auto Hauler Products
- Ratchet Straps & Tie Down Straps
- Load Binders
- Cargo Control
- Cargo Control Accessories
- Chain
- Endless Round Slings
- Cargo Control Hardware
-
Lifting & Rigging
- Eye To Eye Synthetic Web Slings
- Multi-Leg Synthetic Slings
- Endless Web Slings
- Endless Round Slings
- Wire Rope Clips
- Eye Nuts & Eye Bolts
- Turnbuckles
- Beams
- Beam Clamps
- Beam Trolleys
- Blocks
- Hooks
- Latch Kits
- Lifstar Lever Hoists and Chain Falls
- Shackles
- Sockets
- Swage Fittings
- Thimbles
- Winch Lines
- Wire Rope
- Logistics / Enclosed Trailer
- Safety Products
- Strap Protectors / Corner Protectors
- SuperBungees
- Tow Straps
- Towing & Recovery
- Trailer Safety
- Trailer Winches / Winch Bars
- Truck & Trailer Parts
- Synthetic Web Products
- Wire Rope
- X100® Grade 100 Chain & Hardware
Specifications
| STOCK NUMBER | WIDTH | DESCRIPTION | MINIMUM BREAKING STRENGTH (lbs.) |
|---|---|---|---|
| 20M4WHR | 4″ | Standard Handle Ratchet | 20,000 |
DIRECTIONS FOR USE
To operate a Ratchet Buckle, pull the webbing through the mandrel bars eliminating any slack. Operate the ratchet handle back and forth until the webbing is properly tensioned. The mandrel bars must have at least two wraps of webbing to prevent slippage. To release the webbing, pull the handle pawl to the fully opened position and rotate the handle itself past the center position on the ratchet to the fully open position. Finally, pull the webbing back through the mandrel creating slack.