Category
- Ratchet Straps & Tie Down Straps
- Load Binders
- Cargo Control
- Cargo Control Accessories
- Chain
- Endless Round Slings
- Cargo Control Hardware
-
Lifting & Rigging
- Eye To Eye Synthetic Web Slings
- Multi-Leg Synthetic Slings
- Endless Web Slings
- Endless Round Slings
- Wire Rope Clips
- Eye Nuts & Eye Bolts
- Turnbuckles
- Beams
- Beam Clamps
- Beam Trolleys
- Blocks
- Hooks
- Latch Kits
- Lifstar Lever Hoists and Chain Falls
- Shackles
- Sockets
- Swage Fittings
- Thimbles
- Winch Lines
- Wire Rope
- Logistics / Enclosed Trailer
- Safety Products
- Strap Protectors / Corner Protectors
- SuperBungees
- Tow Straps
- Towing & Recovery
- Trailer Safety
- Trailer Winches / Winch Bars
- Truck & Trailer Parts
- Synthetic Web Products
- Wire Rope
- X100® Grade 100 Chain & Hardware
Specifications
| STOCK NUMBER | DESCRIPTION | NUMBER IN BOX |
|---|---|---|
| 16S | 4” Standard Weld-On Winch | 5 |
Note for Safe Operation
NOTE: FOR SAFE OPERATION
1. All winches should be installed so the user can readily see the pawl to ensure proper engagement.
2. The winch should be positioned so the pawl drops into the ratchet wheel by gravity.
3. Winches should never be installed so the user cannot see the pawl engagement or in a position where the user must hold the pawl to engage the ratchet tooth.
4. Weld on winches must be welded to the trailer frame. Minimum weld requirements are 1/4” fillet weld, 4” long on both sides of frame, and 1/8” penetration.